EasyManua.ls Logo

Olivetti Fax_Lab 710 - To Set the Length of Memos and Incoming Messages; To Listen to Incoming Messages and Memos; To Delete Messages and Memos You Have Already Listened to

Olivetti Fax_Lab 710
80 pages
Print Icon
To Next Page IconTo Next Page
To Next Page IconTo Next Page
To Previous Page IconTo Previous Page
To Previous Page IconTo Previous Page
Loading...
41
T
O
SET
THE
LENGTH
OF
MEMOS
AND
INCOMING
MESSAGES
1. Press the key:
The display shows:
MENU
RECEPT. SET-UP
2. Press the keys
until the display shows:
MENU
TAD SET-UP
3. Press the key:
The display shows:
TAD SET-UP
ICM ON SPEAKER
4. Press the keys
until the display shows:
TAD SET-UP
ICM REC.TIME
5. Press the key:
The display shows:
ICM REC.TIME
30 SECS
6. To view the other available value, "ICM REC.TIME -
60 SECS", press the keys:
7. To confirm the setting, press the key:
8. To return the fax machine to the initial stand-by mode,
press the key:
9. If you want to move back one function, press the key:
T
O
LISTEN
TO
INCOMING
MESSAGES
AND
MEMOS
If there is one or more incoming messages or memos in
the memory of the telephone answering device that have
not yet been played back, the
(MESSAGES) LED
indicator blinks and the display shows the total number
of messages recorded (including the memos), for ex-
ample, 03:
TAD/FAX 03
01-Sep-07 10:32
At this point, you can listen to all the messages (through
the speaker or the handset), including the memos -
which are recorded in the memory and numbered pro-
gressively up to a maximum of 49 - starting from the first
that you have not yet played. Whenever a message is
played, the display shows the day and time at which the
message was received.
You can listen to the messages through the speaker
of the fax machine, which plays them in sequence, sepa-
rating them by a brief audible signal.
To do this, press the key:
You can also listen to the messages without anyone
else hearing.
To do this:
1. Press the key:
2. Lift the handset.
Having played back the last message, the fax machine emits
two short beeps and returns automatically to the initial stand-
by mode. The
(MESSAGES) indicator LED stops blinking
and will remain on steady.
T
O
DELETE
MESSAGES
AND
MEMOS
YOU
HAVE
ALREADY
LISTENED
TO
You cannot delete a message or a memo until you have
started listening to it.
Incoming messages and memos that have not been played
back cannot be deleted. The memory cannot therefore be
completely cleared until all the messages and memos present
in it have been played back.

Table of Contents

Related product manuals