48
TO CHANGE THE NUMBER OF RINGS
This function is only enabled in some countries.
If set in "AUTOMATIC", "PHONE/FAX" or "TAD/FAX"
reception mode, the fax machine automatically answers
calls after a certain number of rings.
If you want, you can change the number of rings, as
follows:
1. Press the key:
The display shows:
MENU
RECEPT. SET-UP
2. Press the key:
The display shows:
RECEPT. SET-UP
RECEPTION MODE
3. Press the keys
until the display shows:
RECEPT. SET-UP
RINGS NUMBER
4. Press the key:
The display shows:
RINGS NUMBER
2
5. To view the other available values, "RINGS NUMBER
- 1", "RINGS NUMBER - 3", "RINGS NUMBER - 4",
"RINGS NUMBER - 5", "RINGS NUMBER - 6", "RINGS
NUMBER - 7" and "RINGS NUMBER - 8", press the
keys:
6. To confirm your choice, press the key:
7. To return the fax machine to its initial stand-by mode,
press the key:
8. If you want to move back one function, press the key:
Note
If you connect an external telephone answering device,
make sure that the number of rings after which the answering
device is activated is less than the one set on the fax machine.
2. Press the keys
until the display shows:
MENU
INSTALLATION
3. Press the key:
The display shows:
INSTALLATION
STATION NAME
4. Press the keys
until the display shows:
INSTALLATION
TEL.LINE SETUP
5. Press the key:
The display shows:
TEL.LINE SETUP
LINE TYPE
6. Press the keys
until the display shows:
TEL.LINE SETUP
CALLER ID
7. Press the key:
The display shows:
CALLER ID
YES
8. To view the other available option, "CALLER ID - NO",
press the keys:
9. To confirm your choice, press the key:
10. To return the fax machine to its initial stand-by mode,
press the key:
11. If you want to move back one function, press the key:
NOTE
With this function enabled, the date and time will be brought
up to date whenever a call is received.
To Next Page
Loading...
