Olivetti Fax_Lab 710 - Page 56

54
7. Press the key:
The display shows:
FAX HEADER
INSIDE
8. To select the alternative parameter, press the keys:
The display shows:
FAX HEADER
OUTSIDE
9. To confirm the setting, press the key:
10. To return the fax machine to its initial stand-by mode,
press the key:
11. If you want to move back one function, press the key:
TO HEAR THE LINE SIGNALS
The fax machine is set up so that you can hear the
dialling tones during the dialling phases as well as
the connection signals exchanged between your fax
machine and your correspondent's fax machine. If you
cannot hear them, program the function as follows:
1. Press the key:
The display shows:
MENU
RECEPT. SET-UP
2. Press the keys
until the display shows:
MENU
INSTALLATION
3. Press the key:
The display shows:
INSTALLATION
STATION NAME
4. Press the keys
until the display shows:
INSTALLATION
TEL.LINE SETUP
5. Press the key:
The display shows:
TEL.LINE SETUP
LINE TYPE
6. Press the keys
until the display shows:
TEL.LINE SETUP
LINE MONITOR
7. Press the key:
The display shows:
LINE MONITOR
NO
8. To view the other available option, "LINE MONITOR -
YES", press the keys:
9. To confirm the setting, press the key:
10. To return the fax machine to its initial stand-by mode,
press the key:
11. If you want to move back one function, press the key:
TO REGULATE THE SPEAKER VOLUME
If the volume of the dialling tones and connection sig-
nals is too low or too high, regulate it using the
key.
1. Press the key:
The display shows:
ON LINE
2. To raise or lower the volume of the speaker, press the
key:
The display shows the volume level set on the top line.
3. To return the fax machine to its initial stand-by mode,
press the key: