6
• Unloads a document from the ADF.
• Turns off the "
" LED indicator.
• Returns the fax machine to the stand-
by mode.
• Stops the programming, transmission,
reception or copying operation in
progress.
• In "MANUAL" and "PHONE/FAX"
reception modes starts receiving
a document.
• After the fax number has been
dialled, starts sending a document
(only with the document inserted
in the ADF).
• Confirms the selection of menus,
submenus, parameters and their
values and moves on to the next
condition.
• Starts copying a document (only
with the document inserted in the
ADF).
• Used to dial a telephone or fax number without
lifting the telephone handset.
• Also activates the handsfree function.
Gives access to the Phone book.
• Deletes incorrect settings from the display.
• During the function programming phase, it moves one
function back.
• Displays a list of the last 10 fax or telephone numbers
dialled (outgoing calls) or the last 20 numbers from
which calls have been received and not answered
(incoming calls), irrespective of whether or not a
document was present in the ADF.
After the
button has been pressed, it turns the
speaker volume "up" or "down".
Display
A two-line liquid crystal display with a capacity of 16
characters per line.
Shows operator prompts and error messages.
To Next Page
Loading...
