Olivetti M15 Plus - Page 81

TROUBLE SHOOTING, CUSTOMER TEST
to position 1).
5. If the system was already on, then perform a system
reset through the keyboard by pressing the CTRL+ALT+DEL
key combination.
The Customer Test is loaded automatically,
self-explanatory by means of the messages
the screen. You merely have to follow
instructions which you will be given .
and
is made
appearing on
the simple
6. After each test, you will be shown the results on the
screen. If there is a "fail" indication, make note of
the details and pass these on to your after-sales
service or repair technician.
Once the diagnostic program is loaded, a menu will appear.
You can select one of the options on the
one of the vertical cursor control keys (
highlight the option, and then pressing
confirm the selection.
menu by pressing
or ) to
the ENTER key to
You can follow the same procedure for each menu that
appears after making a selection from the first. The first
screen displays a menu to select the language for the
program messages (54). Select the language you wish.
After you have chosen a language, an initial message and
the CUSTOMER TEST version number are displayed (55). To
continue press the ENTER key. Then a new menu appears on
the video screen offering three options:
TEST ONE MODULE (to test a single module)
SYSTEM CHECKOUT (to test the entire system
automatically, with user interaction required during
the keyboard test, the disk drive test and the video).
PARK DISK HEADS (to set the read/write heads of the
hard disk in a safe zone for transporting the system).
8-5