CompleteTeardown,Cleaning,andReassemblyoftheOlympusBH‐2SlidingFocusBlock Revision2 Page22of23
cleaning with the cotton swabs, to avoid transferring
the grease further onto the guide rails.Keep at this
until all visible traces of grease have been scrubbed
fromtheparts.Thoroughremovalofthisheavygrease
is important, since any exposed grease can lead to an
accumulationofdustand
debriswhichmighteventually
foultheslidingfocusblockmechanism.
ThePreparedGuideBlockisReadytobeReinstalled
The prepared guideblock, with theguide railsinstalled
into the side groove and held in place by the heavy
grease, is now ready to be reinstalled into the sliding
focus‐blockmechanism(seeFigure70).
Figure70–Preparedguideblockreadyforreinstallation
To Next Page
Loading...
