Editing still pictures
Playback
6
105
3 When you have finished editing the data, press Z.
• Raw data can be edited using the following functions.
* Only available when the picture is taken with [WB] set to [V].
4 Select a card, and press Z.
• If only one card is inserted, skip this step.
• When there is insufficient card memory, the display returns to the setting
screen.
5 Select [OK], and press Z.
• The [BUSY] bar is displayed and after
the image is saved, the camera returns
to Step 1.
• The edited picture is stored as a
separate picture from the original.
• To edit the data again, select [RESET],
or to cancel editing, select [CANCEL].
Press Z.
Function Settings
Ref.
page
K TIFF, SHQ, HQ, SQ1, SQ2 P. 33
F ±2 P. 73
WB
AUTO, PRESET1, PRESET2, CUSTOM,
V*
P. 74
> RED7 – BLUE7 P. 78
SCENE MODES NORMAL, i, Q, R P. 80
SHARPNESS ±5 P. 80
CONTRAST ±5 P. 81
HUE ±5 P. 81
SATURATION ±5 P. 82
FUNCTION OFF, BLACK & WHITE, SEPIA P. 92
P –P.106
RAW DATA EDIT
OK
RESET
CANCEL
SELECT
GO
OK
SELECT GO
OK
To Next Page
Loading...
