Formatting
Playback
6
117
1 Select [YES], and press Z.
• All the pictures are erased.
This function lets you format the memory card. Formatting prepares cards
to receive data. Before using non-OLYMPUS cards or cards which have
been formatted on a computer, you must format them with this camera.
All existing data, including protected pictures, are erased when the
card is formatted. Make sure that you save or transfer important data
to a computer before formatting the card.
Top menu [MODE MENU] [CARD] [FORMAT] g“Menus” (P. 23)
1 Select [YES], and press Z.
• The [BUSY] bar is displayed while the
card is formatted.
Note
• Do not do any of the following during formatting as such actions may damage
the card.
Open the card cover, remove the battery, or connect or disconnect the AC
adapter (regardless of whether there is a battery in the camera or not).
ALL ERASE
NO
CAUTION ERASING ALL
YES
GO
OK
SELECT
Formatting
Mode dial
CAUTION ERASING ALL
NO
YES
FORMAT
GO
OK
SELECT
The card to be formatted is
displayed.
To Next Page
Loading...
