Settings
7
129
Power on/off setup
You can select a picture and/or sound to be displayed/output when the
power is turned on and off. You can also register your favorite picture and
display it on the screen. g“Screen setup” (P. 129)
Top menu [MODE MENU] [SETUP] [PW ON/OFF SETUP]
[PW ON SETUP] / [PW OFF SETUP] g“Menus” (P. 23)
1 From [SCREEN], select [OFF], [1]
or [2], and press b.
OFF No picture is displayed (factory
default setting).
1 A picture is displayed.
2 The registered picture is displayed.
If there is no registered picture,
nothing is displayed.
2 From [SOUND], select [OFF], [1]
or [2], and press b.
OFF No startup/shutdown sound is
output (factory default setting).
1 / 2 Startup/shutdown sound is output.
• The volume level is the same as that set
for the playback volume.
g“Playback volume” (P. 128)
3 Press Z.
You can register your favorite picture for display when the power is turned on and
off. Register a picture from the pictures saved on the card and use [PW ON SETUP]
and [PW OFF SETUP] to display it on the startup/shutdown screen. g“Power on/
off setup” (P. 129)
Top menu [MODE MENU] [SETUP] [PW ON/OFF SETUP]
[SCREEN SETUP] [PW ON] / [PW OFF] g“Menus” (P. 23)
Screen setup
Mode dial
PW ON SETUP
SCREEN
SOUND
OFF
1
2
SELECT GO
OK
[PW ON SETUP] screen
OFF
1
2
PW ON SETUP
SCREEN
SOUND
SELECT
GO
OK
[PW ON SETUP] screen
Mode dial
To Next Page
Loading...
