Olympus CAMEDIA C-7070wz - Trimming

Print settings (DPOF)
Printing pictures
8
155
This function enables you to crop part of a recorded picture and print out the
enlarged section only.
1 Select [ P ] on the single-frame reservation screen and press d .
g“All-frame reservation/Single-frame reservation” (P. 152)
• If trimming has already been performed,
the [P] screen is displayed. Select
[RESET], and press Z.
2 Use the arrow pad, zoom lever,
and control dial to control the
trimming position and size.
•Press acbd to move the trimming
frame.
• Move the zoom lever toward W or T to
select the trimming size from small
horizontal frame, large horizontal frame,
small vertical frame, and large vertical
frame.
• Use the control dial to select the height and width of the trimming frame.
• 3:2 trimming size can be selected when the size of the selected picture is
3,072 × 2,048.
3 Press Z.
4 Select [OK], and press Z.
OK Saves the current trimming
size. Returns to the single-
frame reservation screen.
RESET Sets a new trimming size.
→ Repeat the procedure from
Step 2.
CANCEL Cancels the current trimming
setting. Returns to the single-
frame reservation screen.
Trimming
Mode dial
OK
RESET
CANCEL
GO
GO
OK
OK
SELECT
SELECT
GO
OK
SELECT
OK
OK
OK
GO
GO
GO
OK
RESET
CANCEL
GO
GO
OK
OK
SELECT
SELECT
GO
OK
SELECT