Recording movies
88
5
Additional functions
This function reduces the blur incurred by camera movement when taking movies.
The camera moves the image-capture area of the CCD according to the movement
of the subject, reducing blur when recording. The images are recorded slightly larger
when [h] is set to [ON].
Top menu [h] [OFF] / [ON] g“Menus” (P. 23)
1 Take the picture.
Note
• Depending on the card, the remaining recording time may drop rapidly during
recording. Try using the card again after formatting it with your camera.
g “Formatting” (P. 117)
•In n mode, the flash and manual focus (MF) cannot be used.
Camera movement compensation
Note
• When the camera moves a lot or the subject is moving quickly, the
compensation function may not operate effectively.
• When taking pictures with the camera stabilized, set [h] to [OFF], otherwise
the movement of the subject may influence the screen to move.
• When the record mode is set to HQ, SQ1, or SQ2, recording will continue until
the card is full unless stopped by pressing the shutter button.
• A long recorded movie cannot be edited. (P. 109)
• If a single movie recording uses up all of the card’s memory, create space on
the card by erasing the movie or downloading it to a computer.
Notes for recording long movies
Mode dial
0.0
HQ
00
:30
00:30
Displayed during
camera movement
compensation.
To Next Page
Loading...
