Direct printing (PictBridge)
148
8
Printing pictures
To trim a picture by [MORE] in [PRINT] or [MULTI PRINT] mode, follow the
procedure below.
1 Use the arrow pad and zoom
lever to select the trimming
position and size.
•Press acbd to move the trimming
frame.
• Move the zoom lever toward W or T to
select the trimming size from small
horizontal frame, large horizontal frame,
small vertical frame, and large vertical
frame.
• Use the control dial to select the height and width of the trimming frame.
• 3:2 trimming size can be selected when the size of the selected picture is
3,072 × 2,048.
• If trimming has already been performed, the [P] screen is displayed.
Select [RESET] and press Z.
2 Press Z.
3 Select [OK], and press Z.
OK Saves the current trimming
size.
RESET Sets a new trimming size.
→ Repeat the procedure from
Step 1.
CANCEL Cancels the current trimming
setting.
•Press Z to complete trimming and return to the [PRINT INFO] screen.
Trimming
Note
• The size of the printed picture varies depending on the printer settings. If the
trimmed picture is small, printing magnification increases the picture
accordingly, resulting in a printed picture with lower resolution.
• For the best results with enlarged prints, you are recommended to use [TIFF],
[SHQ] or [HQ] mode.
OK
OK
GO
GO
OK
RESET
CANCEL
GO
OK
SELECT
GO
OK
SELECT
To Next Page
Loading...
