Using card media
39
Tips before you start taking pictures
2
Tips before you start taking pictures
1 Confirm that the power switch is aligned with OFF, and open
the card cover.
2 Insert the CompactFlash or Microdrive.
• Hold the card straight and insert it correctly into the
front slot, as shown.
3 Close the card cover securely until it clicks.
Removing the CompactFlash/Microdrive
• Press the eject button gently and allow it to pop out,
then press it again all the way in. The card will be
ejected a short way to enable you to pull it out.
Inserting and removing card media (optional)
Note
• Do not push the card in with a pen or similar hard or pointed object.
• Never open the card cover, or remove the card or the battery while the camera
is turned on. Doing so could destroy the data stored on the card. Once
destroyed, data cannot be restored.
Eject button
To Next Page
Loading...
