92
5
Additional functions
Function shooting (panorama/black & white/sepia)
PANORAMA You can take advantage of panorama shooting with
Olympus cards (xD-Picture Card). Panorama shooting
lets you connect pictures with overlapping edges into a
single panoramic picture, using the OLYMPUS Master
software.
BLACK & WHITE For taking pictures in black and white.
SEPIA For taking pictures in sepia.
Top menu [MODE MENU] [CAMERA] [FUNCTION] [PANORAMA]
g“Menus” (P. 23)
1 Use the arrow pad to choose at
which edge you want to connect
the pictures.
d : The next picture is connected at the
right edge.
b : The next picture is connected at the
left edge.
a :
The next picture is connected at the top.
c : The next picture is connected at the
bottom.
2 Make sure that the edges of the
pictures overlap, then take the
pictures.
• The focus, exposure and white balance
are set by the first picture. Do not select
an extremely bright subject (such as the
sun) for the first picture.
• You cannot adjust the zoom after the first
picture.
• Panorama shooting is possible for up to
10 pictures.
• When you have taken 10 pictures, a
warning mark g is displayed.
Panorama shooting
Mode dial
Connects pictures from
left to right
Connects pictures from
bottom to top
To Next Page
Loading...
