Advanced shooting functions
4
69
Metering
There are 4 ways of measuring the brightness of a subject.
ESP Meters the center of the subject separately from the
surrounding area, and calculates the optimum exposure.
SPOT (5) Exposure is determined by metering within the AF target
mark. In this mode, even a backlit subject can be shot with
optimum exposure regardless of the background light.
MULTI METERING Meters the brightness of the subject at up to 8 different
(MULTI 5) points to determine the optimum exposure based on the
average brightness. This method is useful with a high contrast
subject that is difficult to meter.
4 Meters the brightness over a wide area with emphasis on the
(Center-weighted center of the screen. This method is used when you do not
metering) want to allow surrounding light to affect the picture.
1 Press the 4 button, and turn the control dial.
Select [ESP], [SPOT] or [4], and press the 4 button.
g“Direct buttons” (P. 16)
1 Press the 4 button, and turn the control dial.
Select [MULTI METERING], and press the 4 button.
g“Direct buttons” (P. 16)
ESP/Spot metering/Center-weighted metering
Multi-metering
Mode dial
MULTI
Mode dial
To Next Page
Loading...
