Advanced shooting functions
4
57
Program shift
P (Program shooting) mode’s program shift allows you to change the
combination of aperture value and shutter speed without altering the
exposure.
1 Press ac to change the shutter
speed and aperture value.
• S is displayed on the control panel.
•Press a, then press c once during program
shift to reset. Or, press c, and press a once
during program shift to reset.
• Changing the shooting mode also cancels program shift.
• The shift range may be limited by subject brightness or flash settings.
This function allows you to set the aperture manually. The camera sets the
shutter speed automatically. By decreasing the aperture value
(F-number), the camera will focus within a smaller range, producing a
picture with a blurred background. Increasing the value forces the camera
to focus over a wider range, resulting in increased “depth of field” in which
both the subject and the background are in focus. Use this mode when you
want to play with how the background is depicted.
Mode dial
Aperture priority shooting
Aperture value (F-number)
is decreased.
Aperture value (F-number)
is increased.
To Next Page
Loading...
