Olympus CAMEDIA C-7070wz - Page 175

Troubleshooting
10
Appendix
175
No indication
Y/M/D
When the camera
is used for the first
time or the battery
has been removed
for a long time, the
date and time are
on the factory
default setting.
Set the date and time.
This card cannot
be used with this
camera or the card
is not formatted.
• Format the card or
replace.
• Select [POWER OFF] and
press Z. Insert a new
card.
• Select [FORMAT] and
press Z. All data on the
card is erased.
No indication ZOOM ERROR
Lens moved due to
an external force.
Turn the camera off by
turning the power switch to
the off position, and turn the
camera on again.
Control panel
Monitor
indication
Possible cause Corrective action
CARD SETUP
POWER OFF
FORMAT
GO
OK
SELECT