Histogram
84
4
Advanced shooting functions
Ex.1: When [F ON] or [ON] is selected in P mode.
Ex.2: When [DIRECT] is selected in P mode.
1 Press the F button, and press Z.
g“Direct buttons” (P. 16)
2 Select a histogram, and press Z.
TIPS
•Press f to switch between normal and histogram display.
g“Direct buttons” (P. 16)
Note
• The histogram is not displayed in the following situations even if [F ON], [ON]
or [DIRECT] is selected.
During panorama shooting or multi-metering.
• The histogram displayed during shooting may differ from the histogram
displayed during playback.
0.0
F2.8
1/1000
P
OK
SET
0.0
F2.8
1/1000
P
OK
SET
The part indicated in green in the histogram shows the luminance distribution
within the histogram target mark.
Histogram target mark
If the peak fills too much of
the red frame, the image
will appear mostly white.
If the peak fills too much of
the blue frame, the image
will appear mostly black.
Bright picture Dark picture
Red dots: Mainly white area
Blue dots: Mainly black area
When there are black and white parts in the
same area, they are displayed as blue dots.
Mode dial
To Next Page
Loading...
