202
Chapter 11
Troubleshooting (Cont.)
POSSIBLE CAUSES CORRECTIVE ACTION
REF. PAGE
1 The flash is closed.
2 The subject is bright
enough to shoot
without flash.
3 Sequential shooting is
on.
4 You are recording
movies.
5 Panorama shooting is
set.
6 FUNCTION is set to
BLACK/WHITE
BOARD.
1 Press the flash switch to
raise the flash.
2 Set the flash to Fill-In mode.
3 Set the drive mode to
(single-frame shooting).
4 Select a shooting mode
other than .
5 Cancel the Panorama mode.
6 Set FUNCTION to OFF.
P. 8 1
P. 8 1
P. 9 9
P. 5 2
P. 105
P. 110
The date recorded with the image data is wrong.
1 The date is not set.
2 The camera has been
left for too long with the
batteries removed and
the date/time setting
was canceled.
1 Set the date. The clock
adjustment is not factory-
preset.
2 Set the date again.
P. 3 0
P. 3 0
Your customized settings have been canceled.
1 You turned off the
power without saving
the settings.
1 Set ALL RESET to OFF.
P. 155
The flash does not fire.
To Next Page
Loading...
