EasyManua.ls Logo

Olympus CX21 - Service Manual

Olympus CX21
25 pages
Print Icon
To Next Page IconTo Next Page
To Next Page IconTo Next Page
Loading...
Maintenance Manual
for maintenance engineer
CX21
Thank you for purchasing the Olympus microscope CX21.
In order to fully utilize its performance and secure optimum condition, please read this manual before
maintenance work.
Please also keep it at hand during maintenance as well as for future reference.
All rights reserved, Reproduction in whole or in part without written permission is prohibited.

Other manuals for Olympus CX21

Questions and Answers

  • R
    Randall DudleySep 9, 2025
    What to do if Olympus CX21 stage lowers by its own weight?
    • K
      katherine60Sep 9, 2025
      If the stage lowers by its own weight or focusing is lost due to slippage of the knob, the coarse adjustment knob tension adjustment ring may be set too loose. Tighten the ring to adjust to proper tension.
  • J
    johnsonjosephSep 12, 2025
    How to adjust tension of Olympus Microscope coarse adjustment knob?
    • A
      Amber DavisSep 12, 2025
      If the tension of the coarse adjustment knob is too high, it is because the coarse adjustment knob tension adjustment ring is set too tight. Loosen the ring to adjust to proper tension.
  • I
    Isabel DelgadoSep 14, 2025
    Why is focusing impossible on Olympus Microscope?
    • P
      Peter PatrickSep 14, 2025
      Focusing might be impossible because the stage cannot be raised if the pre-focusing knob is positioned too low. Raise its position.
  • K
    Karen RiveraSep 16, 2025
    Why Olympus CX21 lamp bulb blows easily?
    • G
      gnunezSep 16, 2025
      The lamp bulb may blow easily if the specified bulb is not used. Replace it with a specified bulb.

Summary

Chapter 1 Maintenance Procedure

Maintenance of Microscope

Covers fundamental handling and proper usage/storage conditions for microscope maintenance.

Guide to Maintenance

Provides an overview of basic maintenance steps and required tools for the microscope.

Preparing for Inspection

Details the steps necessary to prepare the microscope for inspection and testing.

CX21 Inspection Sheet

A checklist for performing a comprehensive inspection of the CX21 microscope.

Chapter 2 Inspection Procedure

Checking Performance of Microscope

Verifies the overall operational performance of the microscope using the inspection sheet.

Checking Dirty Portion

Identifies and assesses the impact of dirt or stains on optical components and image quality.

Chapter 3 Repair Procedure

Optical Adjustment

Guides on adjusting optical components for optimal image alignment and clarity.

Mechanical Adjustment

Details procedures for adjusting mechanical parts like stage movement and wire tension.

Replacing Grease for Coarse;fine Adjustment Knob Assembly

Explains how to replace grease in the coarse/fine adjustment knob assembly for smooth operation.

Replacing Circuit Board

Provides instructions for replacing the main circuit board or its socket.

Replacing Pinion Assembly of Plane Stage

Outlines the steps to replace the pinion assembly on the microscope's plane stage.

Chapter 4 Jigs and Tools; Greases

List of Jigs and Tools

Catalog of specialized tools and jigs required for microscope maintenance and repair.

List of Greases

Details the types of greases recommended for use in microscope maintenance.

Chapter 5 Maintenance Parts

List of Maintenance Parts

Inventory of specific replacement parts available for the CX21 microscope.

Olympus CX21 Specifications

General IconGeneral
TypeBiological Microscope
Power SupplyAC 100-240V, 50/60Hz
EyepieceWidefield 10x
Objective Lenses4x, 10x, 40x, 100x
NosepieceQuadruple
StageMechanical stage
FocusCoaxial coarse and fine focusing
IlluminationLED
CondenserAbbe condenser NA 1.25
Optical SystemUIS2 optical system
Eyepiece TubeBinocular

Related product manuals