Olympus DS-2500 - Using Index Marks

Index marks
Index marks can be placed in a file during recording
or playback. Index marks are used to provide a quick
and easy way to identify important or significant
parts within the file.
Setting an index mark
1 While the recorder is recording or in
playback mode, press the F3 ( INDEX )
button to set an index mark.
• An index number appears on the display.
Locating an index mark
2 While playing back a file, press and hold
the 9 or 0 button.
• The recorder stops for 1 second when it
reaches the index mark.
Clearing an index mark
3 Locate the index mark you want to clear.
4 While the index number appears for
approximately 2 seconds on the display,
press the ERASE button.
• The index mark is erased.
Notes
• Up to 32 index marks can be set with in a fi le.
• When a fi le is locked or set to read-only, or when
the SD card lock is enabled index mark cannot be
erased. Clear the settings before erasing.
PLAY/OK
9 , 0 button
F3 button
ERASE button
029 / 030
INSERT
SPEED
INDEX
DS2500
QP DICT
3H 10 M 56 s
22M 4 0 s
Index 01
Set
Ni
029 / 030
INSERT
SPEED
INDEX
DS2500
QP DICT
3H 10 M 56 s
22M 4 0 s
Index 01
Ni
029 / 030
INSERT
SPEED
INDEX
DS2500
QP DICT
3H 10 M 56 s
2 2 M 4 0 s
Index 01
Clear
Ni
3
EN
38
Index marks