Olympus DS-2500 - Locking and Unlocking Files

Locking files [Lock]
When a file is set to [Lock], [ ] will appear on the
display, allowing you to prevent important files from
accidental erase. Moreover, the file will not be erased
even when all files within a folder are erased.
1 Select the file you want to lock.
2 Select [ Lock ] at the [ File Menu ] screen,
then press the PLAY/OK or 9 button.
• Refer to P.41 regarding each menu item
settings.
4 Press the PLAY/OK button to complete
the setting.
• [File Lock On] or [File Lock Off] will light up
on the display, and it will return to the [File
Menu] screen.
• If you press the 0 or F1 (BACK) button the
setting will be cancelled and it will return to
the [File Menu].
• Pressing the F3 (EXIT) button will cancel the
contents being set and take you out of the MENU.
3 Press the + or – button to select [ On ] or
[ Off ].
[On]: Locks the file and prevents it from being
erased. [
] appears on the display.
[Off]: Unlocks the file and allows it to be erased.
5 Press the F3 ( EXIT ) or 0 button to
close the menu screen.
PLAY/OK
PLAY/OK button
+, − button
9
, 0 button
F1, F3 button
3
EN
42
BACK EXIT
File Menu
Information
Lock
029 / 030
BACK EXIT
Lock
OnC
Off
029 / 030
BACK EXIT
Lock
OnC
Off
File Lock
On
029 / 030
FOLDER
INFO
MENU
DS2500
E
QP CONF
New File
02 M 10 s
3 H 0 8 M 0 5 s
Ni
Locking files