Backlight [Backlight]
When the display backlight is set to [On], the
backlight will light up for about 10 seconds when a
button is pressed.
This is useful in that it allows you to check the display
even in dark locations.
1 Select [
Backlight
] at the [
Display Menu
]
screen, then press the
PLAY/OK
or 9
button.
• Refer to P.41 regarding each menu item
settings.
2 Press the
+
or
–
button to select [
On
] or
[
Off
].
[On]: Backlight is enabled.
[Off]: Backlight is disabled.
3 Press the
PLAY/OK
button to complete
the setting.
• [Setting fixed] will light up on the display,
and it will return to the [Display Menu]
screen.
• If you press the 0 or F1 (BACK) button the
setting will be cancelled and it will return to
the [Display Menu] screen.
• Pressing the F3 (EXIT) button will cancel the
contents being set and take you out of the
MENU.
4 Press the
F3
(
EXIT
) or 0 button to
close the menu screen.
PLAY/OK
PLAY/OK
button
+, −
button
9
,
0 button
F1, F3
button
3
EN
43
Backlight
BACK EXIT
Display Menu
Backlight
12
LED
Contrast
Language
BACK
EXIT
Backlight
On
Off
BACK EXIT
Backlight
On
Off
Setting
fixed
To Next Page
Loading...
