Changing the USB class [USB Settings]
Besides setting to [PC] (Connect to PC to transfer
files) or [AC Adapter] (Connect to AC adapter to
recharge the battery), you can switch the USB class
according to your usage.
1 Select [
USB Settings
] at the [
Device
Menu
] screen, then press the
PLAY/OK
or
9 button.
• Refer to P.41 regarding each menu item
settings.
2 Press the
+
or
–
button to select [
USB
Connect
] or [
USB Class
].
[USB Connect]: Setting for connecting to the PC.
[USB Class] : S e t t i n g f o r U S B c l a s s .
[PC]: Setting for when the recorder is connected
to the PC and used as a storage device or
composite device. Connected as storage or
composite.
[AC Adapter]: Setting for when the recorder is
connected to the PC for charging or to the AC
Adapter (A514) (optional).
[Optional
]: Setting to confirm the connection
method each time a USB connection is made.
When [USB Connect] is selected:
4 Press the + or − button to change the
setting.
BACK EXIT
Device Menu
Beep
Time & Date
Battery
USB Settings
Reset Settings
Power Save
BACK EXIT
USB Settings
USB Connect
USB Class
BACK EXIT
USB Connect
PC
AC Adapter
Optional
PLAY/OK
PLAY/OK
button
+, −
button
9
,
0 button
F1, F3
button
3 Press the
PLAY/OK
button.
• If you select [USB Class], proceed to the
operation of Step 6.
5 Press the
PLAY/OK
button to complete
the setting.
• If you select [USB Connect], proceed to the
operation of Step 8.
3
EN
48
Changing the USB class
To Next Page
Loading...
