Olympus E-600 - Using the Direct Buttons to Operate the Camera

20
EN
Using the direct buttons to operate the camera
SELECT SET
1 Press the button for the function
you want to set
• The direct menu is displayed.
e.g.) Setting Sequential/Self-timer shooting
List of direct buttons
No. Direct buttons Function Ref. page
1
Y/j Self-timer/Sequential shooting P. 60-61
2
# Sets flash mode P. 72
2+3
# + F Flash intensity control P. 75
3
F Exposure compensation P. 49
4
P AF target selection P. 56
5
o Sets image stabilizer P. 62
6
WB Sets white balance P. 66
7
AF Sets AF mode P. 54
8
ISO Sets ISO sensitivity P. 52
9
d Sets metering mode P. 48
3
8
2
1
4
5
6
7
j
Control dial
9
Direct menu
2 Turn the control dial to change the setting
• The function assigned to the button that was pressed remains selected for approximately
8 seconds. You can turn the control dial and set the function during that time. If no
operations are performed for 8 seconds, the setting for that function is confirmed.
g“BUTTON TIMER” (P. 96)
s0030_e_00_0_unified.book 20 ページ ２００９年７月３日 金曜日 午後４時１１分