58
EN
3
Focusing and shooting functions
Registering an AF target mode
You can register a frequently used AF target mode and the position of that AF target. You can
then quickly load that registered setting (“home position”) and use it when shooting.
Registering
1 In the screen of Step 2 of “Selecting the AF
target mode and position” (gP. 57), press the
< button and F button at the same time.
• The home position is registered at the time the buttons
are pressed.
• The home position cannot be registered when
operated from a menu.
Shooting
To use this function, you must assign the [PHOME] function to the < button in advance.
g“; FUNCTION” (P. 95)
1 Press the < button.
• The registered home position is selected. Press this button again to switch to the original AF
target mode.
x Notes
• The AF sensitivity is not recorded when registering the home position.
HP
SELECT
AF AREA
SET
Indicates that the AF target
is being registered.
s0030_e_00_0_unified.book 58 ページ ２００９年７月３日 金曜日 午後４時１１分
To Next Page
Loading...
