Olympus E-600 - Page 57

57
EN
3
Focusing and shooting functions
• When M is set, you can select the AF target with p.
Selecting the AF target mode and position
Select the AF target mode or select the AF target to use with Single target AF mode.
1 Press the P button to enable selection of the AF target mode and position.
2 Use the control dial or arrow pad to select the
AF target.
The control dial moves in hi directions.
• Press the i button to return the position of the AF
target to the center.
• When [IMAGER AF] is set, you can use the P
button or super control panel to select the AF target. Use
the control dial or arrow pad to select the AF target.
Selecting the position of the AF target with the arrow pad without pressing the P
button:
j Press the shutter button halfway and release it, then use the arrow pad to change the position of
the AF target. g“n FUNCTION” (P. 97)
Menu MENU[c][R][AF AREA]
 TIPS
Set to b.
250
250
F5.6
F5.6
s0030_e_00_0_unified.book 57 ページ ２００９年７月３日 金曜日 午後４時１１分