Using Software Options
Part # 910-250C
151
Figure 103 ADDT Test
9.17.3 Activating the API 5UE Software
The API 5UE software option is located in the Options Menu, under MORE OPTIONS.
To activate the option, enter the API 5UE menu and press [ENTER]. A “x” appears in the
menu box, indicating that the feature is active. You must now enter the height of your
reference notch for calibration purposes. Use the up and down slewing keys to increase or
decrease the highlight reference depth value until the correct value is displayed. Press
OPTION to exit.
Figure 104 API 5UE Software Option
To Next Page
Loading...
