Managing Basic Operations
Part # 910-250C
21
Figure 7 Full Screen Display
Top of the screen
• The Filename, Gain level, ID Code, Range setting, and currently selected parameters
are constantly displayed.
• A numeric display shows thickness, soundpath, amplitude, or Time-of-Flight data
pertaining to a gated signal. Use [DEPTH /%AMPL] to select which information to
show.
Middle of the screen
• Displays the waveform.
• In the background, a numbered graticule shows signal amplitude on the vertical axis
and screen division number or the function presets on the horizontal axis. To view the
screen divisions instead of the function presets, press [2nd F], then [ZERO
OFFSET] (#DIV).
• On the right side of the waveform display, a set of display flags and markers appears
when certain functions are active.
Bottom of the screen
• Displays the preset values for many of the parameters. These are accessed via the
function keys.
• The battery level icon is constantly displayed in the bottom right corner.
3.6.2 Split Screen Display
The split screen display presents a condensed waveform and a status display that shows all
instrument set-up data. This screen is useful when establishing the initial instrument
settings as it enables you to quickly check all set-up information and make adjustments
while viewing the waveform display. Even in the split screen mode, the A-Scan still has
enough resolution to produce accurate waveforms.
To display a split screen, follow these steps:
To Next Page
Loading...
