Olympus Panametrics Epoch 4 Plus - 3.4 Editable Parameters Software

Managing Basic Operations
Part # 910-250C
17
3.4 Editable Parameters Software
Using the Editable Parameters option, you can customize some of the values that appear
above the [F1] to [F5] keys. These are the values that the EPOCH 4PLUS recalls
automatically when the corresponding [F] key is pressed. You can edit the following
parameters:
•Gain
• Reference Gain
•Reject
• Zero Offset
•Angle
• Frequency
•Range
• Thickness
•Velocity
Note: Parameters that contain text, such as Rectification, cannot be adjusted. Also,
parameters that are limited by hardware and/or software constraints such as
Damping cannot be adjusted.
To activate the Editable Parameters menu, follow these steps:
1. Press the [OPTION] key.
2. Use the slewing keys to select the Editable Parameters option.
KEYS COLOR FUNCTION
Yellow Alphanumeric Entry: Entry of
alphanumeric characters. The
numeric characters are entered after
pressing the [#] key. The alpha
characters are entered after pressing
the [ALPHA] key.
The Delete function is used to erase a
number or character.
Note: The international keypad uses
an X symbol instead of the Delete
label over the [1] key.
Table 5 Datalogger Alphanumeric Keypad Functions