Managing the Datalogger and Data Communication Features
Part # 910-250C
73
Figure 39 Memory Screen (no stored files)
8.3 Using the Alphanumeric Keypad
The EPOCH 4PLUS datalogger can be used for thorough documentation of inspection
data by entering alphanumeric strings in the following ways:
• To enter file names, extensions, dates, times, and notes
• To enter identifier (ID) location codes for thickness or A-Scan data
• To enter memos
To enter numbers, follow these steps:
1. Press [#] to put the EPOCH 4PLUS in Numeric Entry mode. A flashing “!” appears.
2. Press any numeric key to enter the selected digit. The cursor automatically advances
one position to the right.
3. Use the [<] or [>] keys to skip spaces or move the cursor back to re-enter over an
existing character.
To enter letters, follow these steps:
1. Press [ALPHA] to begin entry of alpha characters. A flashing “ __” appears.
2. Press the corresponding number where the letter exists. There are two or three letters
per key. Choose the correct letter by pressing the key multiple times. For example, to
enter the letter A, press the [2] key once. To enter the letter C, press the [2] key three
times.
3. Use the [<] or [>] keys to skip spaces or move the cursor back to re-enter over an
existing character.
To Next Page
Loading...
