Managing Special Waveform Functions
Part # 910-250C
43
you can do a variety of functions such as storage of the waveform or thickness data and
entry of an alphanumeric location code or memo to describe the data. It is possible to
manipulate the gates to obtain thickness or soundpath data.
The Freeze function differs from Peak Memory in that no new data is acquired and added
to the instrument display. The [FREEZE] key is ideal for high temperature
measurements.
When Freeze is active, the following parameters cannot be changed/accessed:
• Zero Offset
•Range
• Zoom
•Reject
•Gain
• Reference Gain
•Peak Memory
•Peak Hold
• Pulser Receiver and Filter Settings
To disable the Freeze function and return to normal operation, press [FREEZE] again.
To Next Page
Loading...
