Olympus PSD-10 User Manual

INSTRUCTIONS
ELECTROSURGICAL UNIT
WARNING
The user of this equipment should be thoroughly trained in the applicable procedure.
Furthermore, failure to read and thoroughly understand the contents of this instruction
manual may result in serious injury to the patient and/or user. It is essential to follow
the instructions contained in this and other manuals which pertain to any equipment
and accessories used in conjunction with this equipment. Possible injuries related
to endoscopic procedures may include electric shock, explosion, burns, perforation,
hemorrhage, etc.
Failure to follow these instructions may also result in damage to and/or malfunction
of this equipment.
CAUTION
Federal (USA) law restricts this device to sale by or on the order of a physician.
Non-Controlled Document

Olympus PSD-10 Specifications

General

Brand	Olympus
Model	PSD-10
Category	Medical Equipment
Language	English

Summary

1 FEATURES AND MAIN SPECIFICATIONS

1-1 Features

Lists key operational characteristics and benefits of the PSD-10 electrosurgical unit.

1-2 Main Specifications

Details technical specifications including applicable field, waveform, output, and adjustment parameters.

1-3 Safety Precautions

Outlines critical safety measures for using the PSD-10, including grounding, flammable gases, and liquids.

2 DESCRIPTION OF CONTROLS

3 CONSTRUCTION

4 STANDARD SET

5 PREPARATION FOR USE

5-1 Installation of PSD-10

Details the proper placement and environmental considerations for installing the PSD-10 unit.

5-2 Connection to AC Power

Explains the procedure for safely connecting the PSD-10 to a grounded AC power source.

6 INSPECTION OF ELECTROSURGICAL SYSTEM

1 Power Feeding

Instructions for performing the initial power check and what to expect when turning on the unit.

2 Output Check 1 (PSD-10 alone)

Step-by-step guide for testing the PSD-10 unit's output functionality using a Check Lead.

3 Output Check 2 (Electrosurgical system)

Details the procedure for testing the entire electrosurgical system, including accessories, with the PSD-10.

4 Checking the Output Adjustment Switches

Explains how to verify the functionality of the output adjustment switches on the PSD-10.

5 Checking the Current Selector Switches

Describes the procedure for checking the current selector switches (CUT, BLEND, COAG).

6 Checking the Connection Monitor

Outlines how to test the connection monitor for S-cord and P-cord integrity.

7 ENDOSCOPIC ELECTROSURGERY

7-1 Precautions against Patient/Operator Burns

Provides essential safety precautions to prevent accidental burns during endoscopic electrosurgery.

7-2 Setup of Patient-plate

Details the correct procedure for attaching the patient plate to ensure effective contact and prevent burns.

7-3 Electrosurgery

Explains the process of selecting current type and output level for electrosurgery.

4 Connection of A-Cord

Describes how to connect the A-cord to the PSD-10 and the electrosurgical accessory.

5 Operation

Guides the user on how to operate the electrosurgical unit during a procedure and troubleshooting common issues.

7-4 After Operation

Instructions for safely powering down and disconnecting the PSD-10 unit after use.

8 CARE AND STORAGE

8-1 Care After Use

Provides instructions on cleaning the PSD-10 unit and its accessories after each use.

8-2 Storage

Details the recommended procedures for storing the PSD-10 unit safely and properly.

9 MAINTENANCE

9-1 Replacement of Fuse

Explains how to replace a blown fuse in the PSD-10 unit.

9-2 Cleaning of Ventilation Grills

Instructions for cleaning the ventilation grills of the PSD-10 unit.

9-3 Periodic Inspection

Recommends periodic inspection of the PSD-10 unit and when to contact service.

10 ELECTROSURGICAL SYSTEM CHART