Omega I.Server MicroServer I.THX-M - Configuration (Recording Not Active)

4.3.5 Configuration (continued)
Figure 4.11 Configuration (Recording not Active)
No. Sensor Name Read Command Offset
Remote Format
Remote End Char
1
2
3
Temperature
Humidity
Dewpoint
SRTF
SRH
SRDF
T_00.00F
H_00.00%
D_00.00F
0D
0D
0D
000.0
000.0
000.0
CONFIGURATION
http://192.168.1.50
CONFIGURATION
Terminal Server
Alarm Setup
Real Time Clock
2-MegaBytes Flash Card 22 Kbytes Used Space
AC Power On. Check Battery
Remote Access (Tunneling)
Update
Start Recording
Remote IP Address:
Remote Port:
Remote Access:
TCP/UDP:
Server Type: Forward CR
Number of
Connections
Port:
2000
Command
TCP
2000
Disable
0.0.0.0
Click on Sensor No. on left to modify Sensor Parameters.
Main Menu
Clock Date:
06/01/2009
mm/dd/yyyy Time:
12:00:00
hh:mm:ss
Disable
Time Stamp:
Disable
Alarm 1 Temperature:
Unlatch
Enabled Alarm 1:
Disable
Alarm 2 Humidity:
Unlatch
Enabled Alarm 2:
50.0
SP1_L:
80.0
nnn.n
nnn.n
SP1_H:
60.0
SP2_L:
90.0
nnn.n
nnn.n
SP2_H:
5
Read Settings
Hard Reset
Address
Title:
Data_Record_Test
Degree Unit:
F
LCD/PWR:
ON
24