Do you have a question about the Omega I.Server MicroServer I.THX-M and is the answer not in the manual?
Brand | Omega |
---|---|
Model | I.Server MicroServer I.THX-M |
Category | Measuring Instruments |
Language | English |
Safety and EMC guidelines for installation and operation.
Overview of iServer features, charting, flash memory, and connectivity.
Physical dimensions of the iServer unit.
Instructions for mounting the iServer unit on a wall.
Explanation of DIP switch functions for configuration.
Identification of various components and connectors on the iServer.
Details on Ethernet RJ45 pinout and crossover wiring.
How DHCP enables automatic IP configuration for the iServer.
Importance of unique IP addresses for network connectivity.
Information on the iServer's default IP and subnet mask settings.
Explanation of default TCP socket port numbers for iServer communication.
Procedures for testing network connectivity to the iServer.
Guide to using iConnect software for IP address assignment and configuration.
Steps to change the iServer's IP address using its web interface.
Instructions for accessing and navigating the iServer's web interface.
How to view real-time temperature, humidity, and dewpoint readings.
Methods for downloading and graphing stored data from the iServer.
Detailed setup and configuration options for the iServer.
Setting sensor parameters, degree units, and LCD/PWR options.
Steps to configure and start data recording to the flash memory.
Information on using iLog software for logging data.
Setting up email notifications for alarm conditions.
Detailed specifications for humidity and temperature sensors.
Technical specifications for the iServer unit, including interfaces and memory.
Default factory settings for network and terminal server parameters.
Definitions of technical terms used in the manual.
Explanation of IP address structure and classes.
Explanation of subnet masks and their use in IP addressing.
Information regarding CE and FCC certifications.
Terms and conditions of the product warranty and disclaimer.
Procedures for returning products for warranty or repair services.