3-Point Certificate of Conformance
Model Number: iTHX-M
OMEGA Engineering, Inc. certifies that the instrument referenced above
has been fully inspected, tested and calibrated prior to shipment in
accordance with the instruction manual supplied. OMEGA Engineering
further certifies that this instrument meets or exceeds all of the published
electrical, mechanical and operational performance characteristics.
All tests and calibrations were performed with instruments, equipment and
standards which are traceable to the U.S. National Institute of Standards
and Technology.
Specifically this instrument is accurate to within:
VALUE
SPECIFICATIONS
33% RH ± 2%
75% RH ± 2%
@ 25 °C ± 0.5°C
One Omega Drive, P.O. Box 4047 • Stamford CT 06907-0047 • U.S.A.
TEL: (203) 359-1660 • FAX: (203) 359-7700
www.omega.com • e-mail: info@omega.com
OMEGA ENGINEERING, INC.
To Next Page
Loading...
Need help?
General
