4 Cleaning
4-4 Cleaning
4-4 Cleaning
1. Cleaning the UPS
Moisten a soft cloth with water or detergent, squeeze it tightly, and wipe the product
lightly.
Do not use chemicals such as thinner and benzene. (They cause deformation or
discoloration.)
2. Removing dust from the input terminal block, and output terminal block of the UPS
Stop all the connected devices and the UPS and disconnect the AC input from the
commercial power.
Then, remove dust with a dry cloth and make the connection again.
(For information on the connection procedure: see also "2-2 Connecting the equipment.")
BA75T/BA100T/BA100R
76
To Next Page
Loading...
