Omron BA75T - Page 9

Safety Precautions
Caution
(for installation and connection)
Carry the unit consider
ing its weight and balance, and place it on a
stable and robust base.
● Dropping or toppling the unit may cause injury.
● The approximate weight of the unit is 12.5 kg (BA75T/BA100T), 13 kg (BA100R).
● If you drop the unit, stop using it and have it inspected and repaired.
For repair, contact us.
Keep plastic package bags out of reach of children.
● Children may suffocate if they place their heads into plastic bags.
Make sure to connect the unit’s AC input to a commercial power source
with rated input
voltage (100 VAC,110VAC,115VAC,120VAC) and 50/60 Hz
frequency.
●
Connecting to a commercial power source with a different rated input voltage or
frequency may result in a fire.
●
The unit may fail.
When an abnormality (unusual sound or smell) occurs, t
urn OFF the
unit’s “Power” switch
to stop the output, and stop the supply of
commercial power. The socket-
outlet shall be installed near the
equipment and shall be easily accessible.
●
When performing maintenance on the connected devices, follow the above
instructions to ensure safety.
Do not connect devices such as dryers, some solenoid valves, etc.,
which have a half-wave rectifier that allows only half-cycle AC power to
flow through.
● Overcurrent may damage the UPS.
When installing the input cable, make sure to perform the connection as
specified.
● When connecting a cable to the terminal block, use a cable that complies with the
input current specification of the UPS.
Failure to do so may result in electric shock
or ground fault.
Provide secure grounding.
●
Connect the terminal to a commercial power source and ground it. A failure or leak
that occurs when the unit is not properly grounded may result in electric shock.
Do not disassemble, repair, or modify the unit.
● Doing so may cause an electric shock or a fire.
Do not install the unit in other than specified orientations.
● Dropping or toppling the unit may cause injury.
●
If you install the unit in an orientation other than specified, the unit cannot be
protected from a battery fluid leakage.
Do not use the unit where the maximum temperature exceeds 40°C.
● The battery deteriorates rapidly.
●
Doing so may cause a failure or malfunction of the unit.
BA75T/BA100T/BA100R
8