230
Connector Terminals Section 5-2
SRT2-ID32ML-1
The following diagram shows the internal circuits for the SRT2-ID32ML-1.
Wiring
Communications Connector Pin Arrangement
Note 1. OMRON recommends the following products manufactured by Weidmuller
Co., Ltd. for use as crimp terminals.
2. The following special tool is available:
Crimper PZ1.5 (product no. 900599) manufactured by Weidmuller Co., Ltd.
Internal circuitry
Photocoupler
Photocoupler
Communications
power supply
24 V DC
CompoBus/S Communications
The communications connector (provided as standard) can be ordered as
the following product:
BL3.5/6F (product no. 160668) manufactured by Weidmuller Co., Ltd.
Cable
Crimp terminal
CableCrimp terminal
Sleeve (product no. 046290)
For inserting 2 wires (product no. 901851)
Insert cable then crimp
To Next Page
Loading...
