8-9
8 Communications Timing
CJ-series DeviceNet Units Operation Manual for NJ-series CPU Unit(W497)
8-1 Remote I/O Communications Characteristics
8
8-1-4 System Startup Time
Additional Information
Refer to 3-2 Device Variables for CJ-series Unit (Software Switches, Statuses) for details on the
Master Status Area.
It takes approximately 12 seconds from the time that the Controller is reset or restarted, including when
the power is turned ON to the DeviceNet Unit (slave), until remote I/O communications with the master
begin.
Slave Function
To Next Page
Loading...
