Appendices
A-38
CJ-series DeviceNet Units Operation Manual for NJ-series CPU Unit(W497)
User-set Allocations Using the CX-Integrator
The CX-Integrator can be used to set the type of I/O data in the slave, using the connection path.
The user can use this method to specify the I/O data type within the slave with which they would like
perform master and remote I/O communications.
The connection path is saved by the CX-Integrator to the CJ-series DeviceNet Unit scan list and
when the remote I/O communications are started, the connection path is set to the slave via the
DeviceNet network.
Master
I/O data
Connection
Connection path
Slave
Data 1 Data 2
To Next Page
Loading...
