Omron CJ2 Series User Manual

7. EtherNet/IP Connection Procedure
13
7.2.2. Starting the CX-Programmer and Connecting Online with the PLC
Start the CX-Programmer and connect online with the PLC.
Install the CX-One and USB driver in the personal computer beforehand.
1
Start the CX-Programmer.
2
Select Auto Online - Direct
Online from the PLC Menu.
3
The Direct Online Dialog Box is
displayed. Select the USB
Connection Option for
Connection Type and click the
Connect Button.
4
The dialog box on the right is
displayed. Check the contents
and click the No Button.

Omron CJ2 Series Specifications

General

CPU Units	CJ2H, CJ2M
Data Memory Capacity	32K words (CJ2M), 128K words (CJ2H)
EtherNet/IP	Yes (some models)
I/O Capacity	Up to 2, 560 I/O points
Communication Ports	Ethernet, RS-232C
Expansion Units	Up to 40 expansion units
Programming Languages	Ladder diagram, Structured text, Function block diagram
Instruction Execution Speed	0.04 μs (basic instructions)
Serial Ports	1 (RS-232C)
Expansion Slots	Up to 10 (CJ2H)
Operating Temperature	0 to 55°C
Storage Temperature	-25°C to 75°C
Power Supply Voltage	100 to 240 VAC, 24 VDC