Omron CJ2 Series User Manual

7. EtherNet/IP Connection Procedure
24
5
The Communications Setup
Dialog Box is displayed.
Select the Direct connection via
USB Option for Connection
Type.
Click the OK Button.
6
Select Online from the
Controller Menu.
*If the dialog box on the right is
displayed, the model or version
of the Controller does not
match that of the project file.
Match the Controller model and
version by changing the device
settings of the project file, and
then repeat the procedure from
step 1 in this section. Close the
dialog box by clicking the OK
Button.
*The model and version
displayed on the confirmation
dialog box differ depending on
the Controller used and the
device setting of the project file.
Close the dialog box by clicking
the OK Button.
*Example of confirmation dialog box

Omron CJ2 Series Specifications

General

CPU Units	CJ2H, CJ2M
Data Memory Capacity	32K words (CJ2M), 128K words (CJ2H)
EtherNet/IP	Yes (some models)
I/O Capacity	Up to 2, 560 I/O points
Communication Ports	Ethernet, RS-232C
Expansion Units	Up to 40 expansion units
Programming Languages	Ladder diagram, Structured text, Function block diagram
Instruction Execution Speed	0.04 μs (basic instructions)
Serial Ports	1 (RS-232C)
Expansion Slots	Up to 10 (CJ2H)
Operating Temperature	0 to 55°C
Storage Temperature	-25°C to 75°C
Power Supply Voltage	100 to 240 VAC, 24 VDC