Omron CJ2 Series User Manual

10. Appendix 2 Setting the Tag Data Links Using the Software
69
10.4.3. Importing the File, Registering the Tags and Setting the Tag Sets
Import the CSV file that was saved, register tags of the originator's send area and receive
area, and set the tag sets.
This section explains the receive settings and then send settings of the target node.
1
On the Network Configuration
Pane of the Network
Configurator, right-click the node
1 device and select Parameter -
Edit.
2
The Edit Device Parameters
Dialog Box is displayed.
Click the To/From File Button.
3
Select Import from File.

Omron CJ2 Series Specifications

General

CPU Units	CJ2H, CJ2M
Data Memory Capacity	32K words (CJ2M), 128K words (CJ2H)
EtherNet/IP	Yes (some models)
I/O Capacity	Up to 2, 560 I/O points
Communication Ports	Ethernet, RS-232C
Expansion Units	Up to 40 expansion units
Programming Languages	Ladder diagram, Structured text, Function block diagram
Instruction Execution Speed	0.04 μs (basic instructions)
Serial Ports	1 (RS-232C)
Expansion Slots	Up to 10 (CJ2H)
Operating Temperature	0 to 55°C
Storage Temperature	-25°C to 75°C
Power Supply Voltage	100 to 240 VAC, 24 VDC