Omron CJ2 Series User Manual

10. Appendix 2 Setting the Tag Data Links Using the Software
80
10.4.5. Transferring the Tag Data Link Parameters
Transfer the set tag data link parameters to the Controller.
1
Select Download from the
Network Menu.
The dialog box on the right is
displayed. Confirm that there is
no problem and click the Yes
Button.
2
Tag data link parameters are
downloaded from the Network
Configurator to the Controller.
3
The dialog box on the right is
displayed. Check the contents
and click the OK Button.

Omron CJ2 Series Specifications

General

CPU Units	CJ2H, CJ2M
Data Memory Capacity	32K words (CJ2M), 128K words (CJ2H)
EtherNet/IP	Yes (some models)
I/O Capacity	Up to 2, 560 I/O points
Communication Ports	Ethernet, RS-232C
Expansion Units	Up to 40 expansion units
Programming Languages	Ladder diagram, Structured text, Function block diagram
Instruction Execution Speed	0.04 μs (basic instructions)
Serial Ports	1 (RS-232C)
Expansion Slots	Up to 10 (CJ2H)
Operating Temperature	0 to 55°C
Storage Temperature	-25°C to 75°C
Power Supply Voltage	100 to 240 VAC, 24 VDC