Omron CJ2H-CPU6*-EIP Series - Page 20

7
．
EtherNet/IP Connection Procedure
17
5
The operation mode is switched
to the FUNC mode, and SENS
is displayed on Main Display.
*The RUN Indicator goes out in
the FUNC mode.
Keep pressing the
→
(RIGHT)
or the
←
(LEFT) Keys until
SYSTEM is displayed.
Press the ZERO/SET Key.
THRESHOLD H L RUN
6
H.CALIB is displayed on Main
Display.
Keep pressing the
→
(RIGHT )
or the
←
(LEFT) Keys until
COM is displayed.
Press the ZERO/SET Key.
7
RS232C is displayed on Main
Display.
Change the menu from RS232C
to ETN by pressing the
→
(RIGHT ) Key.
Press the ZERO/SET Key.