Omron CJ2H-CPU6*-EIP Series - Page 21

7
．
EtherNet/IP Connection Procedure
18
8
IPADDR is displayed on Main
Display.
Press the ZERO/SET Key.
9
IP1 is displayed on Main
Display.
Press the ZERO/SET Key.
Check that 192 is displayed on
Sub-display.
*The set value here is the first
octet "192" of the IP address
192.168.250.50.
*If the value is different, press
the ZERO/SET Key.
The Sub-display changes to
the editing mode that enables
you to edit the value.
An editable digit of the value
blinks.
Select the digit you want to
change by pressing the
→
(RIGHT ) or the
←
(LEFT)
Keys.
Change the value by pressing
the
↑
(UP) or the
↓
(DOWN)
Keys.
Press the ZERO/SET Key
again to fix the set value.
Press the ZERORST/ESC Key.
The first menu shown in this
step is displayed again
Press the
→
(RIGHT ) Key.
192
000192
192