Omron CJ2H-CPU6*-EIP Series - Page 22

7
．
EtherNet/IP Connection Procedure
19
10
IP2 is displayed on Main
Display.
Press the ZERO/SET Key.
Check that 168 is displayed on
Sub-display.
*The set value here is the
second octet "168" of the IP
address 192.168.250.50.
*If the value is different, change
the value in the same way as
step 9.
Press the ZERORST/ESC Key.
The first menu shown in this
step is displayed again.
Press the
→
(RIGHT ) Key.
168
11
IP3 is displayed on Main
Display.
Press the ZERO/SET Key.
Check that 250 is displayed on
Sub-display.
*The set value here is the third
octet "250" of the IP address
192.168.250.50.
*If the value is different, change
the value in the same way as
step 9.
Press the ZERORST/ESC Key.
The first menu shown in this
step is displayed again.
Press the
→
(RIGHT ) Key.
250