Omron CJ2H-CPU6*-EIP Series - Page 23

7
．
EtherNet/IP Connection Procedure
20
12
IP4 is displayed on Main
Display.
Press the ZERO/SET Key.
Check that 50 is displayed on
Sub-display.
*The set value here is the fourth
octet "50" of the IP address
192.168.250.50.
*If the value is different, change
the value in the same way as
step 9.
Press the ZERORST/ESC Key.
The first menu shown in this
step is displayed again.
Press the ZERORST/ESC Key.
50
13
IPADDR is displayed on Main
Display.
Change the menu to SUBNET
by pressing the
→
(RIGHT) Key.
Press the ZERO/SET Key.