Omron CX-Supervisor - Clearalarmhistory; Closealarmhistory; Closealarmstatus; Displayalarmhistory

Alarm Commands SECTION 6 Functions and Methods
77
References
Refer to the CX-Supervisor User Manual for details of alarms.
6-8-4 ClearAlarmHistory
Syntax
returnstate = ClearAlarmHistory()
Remarks
Typical Example
ClearAlarmHistory()
The alarm history window is cleared and the log is cleared.
References
Refer to the CX-Supervisor User Manual for details of alarms.
6-8-5 CloseAlarmHistory
Syntax
returnstate = CloseAlarmHistory()
Remarks
Typical Example
CloseAlarmHistory()
The alarm history window is closed.
References
Refer to the CX-Supervisor User Manual for details of alarms
6-8-6 CloseAlarmStatus
Syntax
returnstate = CloseAlarmStatus()
Remarks
Typical Example
CloseAlarmStatus()
The current alarm status window is closed.
References
Refer to the CX-Supervisor User Manual for details of alarms.
6-8-7 DisplayAlarmHistory
Syntax
returnstate = DisplayAlarmHistory()
Remarks
Argument Type Description
returnstate bool 1 if the function is successful otherwise 0.
Argument Type Description
returnstate bool 1 if the function is successful otherwise 0.
Argument Type Description
returnstate bool 1 if the function is successful otherwise 0.